3-stage filtration at 2, 000 lpm with particle counter Manufacturer in india Filtration unit supply in West Bengal To design a 3-stage filtration system for a flow rate of 2000 liters per minute (lpm) with a particle counter, we need to consider the following steps: 1. *Identify Particle Size Requirements*: Determine the size range of particles that need to be filtered out. This will help in selecting the appropriate filtration media for each stage. 2. *Select Filtration Media*: Choose filtration media for each stage based on the identified particle size requirements. For example, a pre-filter stage might use a coarse filter to remove larger particles, followed by finer filters in subsequent stages to capture smaller particles. 3. *Calculate Filtration Area*: Determine the required filtration area for each stage based on the flow rate and the efficiency of the filtration media. This ensures that the filtration system can handle the specified flow rate while effectively removing particles. 4. *Install Particle Counter*: Integrate a particle counter into the system to monitor the efficiency of each filtration stage and provide real-time feedback on particle levels. 5. *Optimize Filtration Configuration*: Arrange the filtration stages in a configuration that maximizes particle removal efficiency while minimizing pressure drop and maintenance requirements. 6. *Implement Monitoring and Maintenance Plan*: Establish a plan for regular monitoring and maintenance of the filtration system to ensure continued effectiveness over time. 7. *Testing and Validation*: Test the filtration system under operating conditions to verify its performance and make any necessary adjustments. By following these steps, you can design a 3-stage filtration system with a particle counter to effectively filter a flow rate of 2000 lpm while meeting the specified particle removal requirements. Vivek Enterprise Is Expert In Making This Filtration Unit.